CWE-121

A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.6, Ivanti Policy Secure before version 22.7R1.4, and Ivanti ZTA Gateways before version 22.8R2.2 allows a remote unauthenticated attacker to achieve remote code execution.

A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.5, Ivanti Policy Secure before version 22.7R1.2, and Ivanti Neurons for ZTA gateways before version 22.7R2.3 allows a remote unauthenticated attacker to achieve remote code execution.

A Stack-based buffer overflow vulnerability in SMA100 Apache httpd server's mod_cgi module environment variables allows a remote unauthenticated attacker to potentially execute code as a 'nobody' user in the appliance. This vulnerability affected SMA 200, 210, 400, 410 and 500v appliances firmware 10.2.0.8-37sv, 10.2.1.1-19sv, 10.2.1.2-24sv and earlier versions.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

Amcrest cameras and NVR are vulnerable to a stack-based buffer overflow over port 37777. An authenticated remote attacker can abuse this issue to crash the device and possibly execute arbitrary code.

A stack-based buffer overflow vulnerability [CWE-121] vulnerability in Fortinet FortiCamera 2.1.0 through 2.1.3, FortiCamera 2.0 all versions, FortiCamera 1.1 all versions, FortiMail 7.6.0 through 7.6.2, FortiMail 7.4.0 through 7.4.4, FortiMail 7.2.0 through 7.2.7, FortiMail 7.0.0 through 7.0.8, FortiNDR 7.6.0, FortiNDR 7.4.0 through 7.4.7, FortiNDR 7.2.0 through 7.2.4, FortiNDR 7.0.0 through 7.0.6, FortiRecorder 7.2.0 through 7.2.3, FortiRecorder 7.0.0 through 7.0.5, FortiRecorder 6.4.0 through 6.4.5, FortiVoice 7.2.0, FortiVoice 7.0.0 through 7.0.6, FortiVoice 6.4.0 through 6.4.10 allows a remote unauthenticated attacker to execute arbitrary code or commands via sending HTTP requests with specially crafted hash cookie.

Stack-based buffer overflow in Adobe Flash Player before 13.0.0.259 and 14.x and 15.x before 15.0.0.246 on Windows and OS X and before 11.2.202.425 on Linux allows attackers to execute arbitrary code via unspecified vectors, as exploited in the wild in December 2014.

An issue was discovered in router/upnp/src/ssdp.c in DD-WRT before 45724. An unsafe strcpy in the UPnP handling functionality allows an unauthenticated remote attacker to send a request that would overflow an internal fixed buffer. Exploitation requires the DD-WRT user to enable UPnP (which is off by default, and only listens on internal interfaces by default). This occurs in ssdp_msearch (reachable by an M-SEARCH request).

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: Execute arbitrary code Elevate privileges Execute arbitrary commands Bypass authentication and authorization protections Fetch and run unsigned software Cause denial of service (DoS) For more information about these vulnerabilities, see the Details section of this advisory.

Active! mail 6 BuildInfo: 6.60.05008561 and earlier contains a stack-based buffer overflow vulnerability. Receiving a specially crafted request created and sent by a remote unauthenticated attacker may lead to arbitrary code execution and/or a denial-of-service (DoS) condition.

When a BIG-IP APM access policy is configured on a virtual server, specific malicious traffic can lead to Remote Code Execution (RCE).   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Stack-based buffer overflow in the acdb_ioctl function in audio_acdb.c in the acdb audio driver for the Linux kernel 2.6.x and 3.x, as used in Qualcomm Innovation Center (QuIC) Android contributions for MSM devices and other products, allows attackers to gain privileges via an application that leverages /dev/msm_acdb access and provides a large size value in an ioctl argument.

A stack-based buffer overflow exists in the get_merge_ipaddr function of the httpd binary on Linksys E1200 v2 routers (Firmware E1200_v2.0.11.001_us.tar.gz). The function concatenates up to four user-supplied CGI parameters matching <parameter>_0~3 into a fixed-size buffer (a2) without bounds checking. Remote attackers can exploit this vulnerability via specially crafted HTTP requests to execute arbitrary code or cause denial of service without authentication.

The infocmp command-line tool in ncurses before 6.5-20251213 has a stack-based buffer overflow in analyze_string in progs/infocmp.c.

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### IP field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v3 = strlen(g_network_config->ip_addr); memcpy(&reply_buf[36], g_network_config->ip_addr, v3);

The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs. Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.

An issue was discovered in function d_print_comp_inner in file cp-demangle.c in BinUtils 2.26 allows attackers to cause a denial of service via crafted PE file.

CZ.NIC BIRD Internet Routing Daemon through 2.19.0 contains a stack-based buffer overflow in the BGP AS_PATH mask matching implementation in nest/a-path.c. The as_path_match() function uses a fixed-size stack array of 2048 + 1 pm_pos entries, while parse_path() expands AS_PATH segments from a received BGP UPDATE without enforcing a corresponding capacity limit. When RFC 8654 BGP Extended Messages are enabled and a BIRD filter evaluates an AS path mask expression such as "bgp_path ~ [= ... =]", an established BGP peer can send a long AS_PATH containing more than 2048 expanded ASNs. This causes parse_path()/as_path_match() to write beyond the fixed stack buffer, resulting in a crash of the daemon. NOTE: reportedly, the Supplier's position is that a fix is not being prioritized because all network operators should already be rejecting routes with unusually long attributes.

A flaw was found in GNU Coreutils. The sort utility's begfield() function is vulnerable to a heap buffer under-read. The program may access memory outside the allocated buffer if a user runs a crafted command using the traditional key format. A malicious input could lead to a crash or leak sensitive data.

A flaw was found in the GnuTLS library, specifically in the gnutls_pkcs11_token_init() function that handles PKCS#11 token initialization. When a token label longer than expected is processed, the function writes past the end of a fixed-size stack buffer. This programming error can cause the application using GnuTLS to crash or, in certain conditions, be exploited for code execution. As a result, systems or applications relying on GnuTLS may be vulnerable to a denial of service or local privilege escalation attacks.