Known-exploited vulnerabilities

A vulnerability in the web interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to log in to an affected device using a low-privileged account to access sensitive data within the impacted systems. This vulnerability is due to the presence of static user credentials for a low-privileged account. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and access sensitive data as the low-privileged user.  Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced.   Cisco has assigned this security advisory a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that this vulnerability can be used with other Cisco Secure FMC Software vulnerabilities to elevate privileges.

The TeleMessage service through 2025-05-05 configures Spring Boot Actuator with an exposed heap dump endpoint at a /heapdump URI, as exploited in the wild in May 2025.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Unspecified vulnerability in the ExternalInterface ActionScript functionality in Adobe Flash Player before 10.3.183.67 and 11.x before 11.6.602.171 on Windows and Mac OS X, and before 10.3.183.67 and 11.x before 11.2.202.273 on Linux, allows remote attackers to execute arbitrary code via crafted SWF content, as exploited in the wild in February 2013.

JFrog Artifactory could return an internal anonymous-user token to an unauthenticated caller when anonymous access is disabled, potentially exposing sensitive resources.

The Graphics Device Interface (GDI) in Microsoft Windows Vista SP2; Windows Server 2008 SP2 and R2 SP1; Windows 7 SP1; Windows 8.1; Windows Server 2012 Gold and R2; Windows RT 8.1; and Windows 10 Gold, 1511, and 1607 allows local users to gain privileges via a crafted application, aka "Windows GDI Elevation of Privilege Vulnerability." This vulnerability is different from those described in CVE-2017-0001, CVE-2017-0025, and CVE-2017-0047.

Out of bounds write in V8 in Google Chrome prior to 124.0.6367.207 allowed a remote attacker to perform an out of bounds memory write via a crafted HTML page. (Chromium security severity: High)

A use after free issue was addressed with improved memory management. This issue is fixed in iOS 12.5.4. Processing maliciously crafted web content may lead to arbitrary code execution. Apple is aware of a report that this issue may have been actively exploited..

A migration tool component of Trend Micro Apex One (2019) and OfficeScan XG contains a vulnerability which could allow remote attackers to execute arbitrary code on affected installations (RCE). An attempted attack requires user authentication.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS and IOS XE Software contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP - Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. A successful exploit could allow the attacker to execute arbitrary code and obtain full control of the affected system or cause the affected system to reload. Customers are advised to apply the workaround as contained in the Workarounds section below. Fixed software information is available via the Cisco IOS Software Checker. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. There are workarounds that address these vulnerabilities.

Windows Common Log File System Driver Elevation of Privilege Vulnerability

Windows LSA Spoofing Vulnerability

Linux distributions that have not patched their long-term kernels with https://git.kernel.org/linus/a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (committed on April 14, 2015). This kernel vulnerability was fixed in April 2015 by commit a87938b2e246b81b4fb713edb371a9fa3c5c3c86 (backported to Linux 3.10.77 in May 2015), but it was not recognized as a security threat. With CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE enabled, and a normal top-down address allocation strategy, load_elf_binary() will attempt to map a PIE binary into an address range immediately below mm->mmap_base. Unfortunately, load_elf_ binary() does not take account of the need to allocate sufficient space for the entire binary which means that, while the first PT_LOAD segment is mapped below mm->mmap_base, the subsequent PT_LOAD segment(s) end up being mapped above mm->mmap_base into the are that is supposed to be the "gap" between the stack and the binary.

A improper limitation of a pathname to a restricted directory vulnerability ('path traversal') [CWE-22] in Fortinet FortiOS version 7.2.0 through 7.2.3, 7.0.0 through 7.0.9 and before 6.4.11 allows a privileged attacker to read and write files on the underlying Linux system via crafted CLI commands.

Sophos XG Firewall 17.x through v17.5 MR12 allows a Buffer Overflow and remote code execution via the HTTP/S Bookmarks feature for clientless access. Hotfix HF062020.1 was published for all firewalls running v17.x.

A type confusion issue was addressed with improved checks. This issue is fixed in Safari 17.3, iOS 15.8.7 and iPadOS 15.8.7, iOS 16.7.5 and iPadOS 16.7.5, iOS 17.3 and iPadOS 17.3, macOS Monterey 12.7.3, macOS Sonoma 14.3, macOS Ventura 13.6.4, tvOS 17.3, visionOS 1.0.2. Processing maliciously crafted web content may lead to arbitrary code execution. This fix associated with the Coruna exploit was shipped in iOS 17.3 on January 22, 2024. This update brings that fix to devices that cannot update to the latest iOS version.

Use after free in Media in Google Chrome prior to 81.0.4044.92 allowed a remote attacker to execute arbitrary code via a crafted HTML page.

The Director database component of MiVoice Connect through 19.3 (22.22.6100.0) could allow an authenticated attacker to conduct a code-injection attack via crafted data due to insufficient restrictions on the database data type.

A vulnerability in the Edge Gateway component of Mitel MiVoice Connect through 19.3 (22.22.6100.0) could allow an authenticated attacker with internal network access to conduct a command-injection attack, due to insufficient restriction of URL parameters.

A memory corruption issue was addressed with improved state management. This issue is fixed in iOS 12.5.4. Processing maliciously crafted web content may lead to arbitrary code execution. Apple is aware of a report that this issue may have been actively exploited..

The Firefox sandbox in Adobe Flash Player before 10.3.183.67 and 11.x before 11.6.602.171 on Windows and Mac OS X, and before 10.3.183.67 and 11.x before 11.2.202.273 on Linux, does not properly restrict privileges, which makes it easier for remote attackers to execute arbitrary code via crafted SWF content, as exploited in the wild in February 2013.

An authentication issue was addressed with improved state management. This issue is fixed in macOS Golden Gate 27, macOS Sequoia 15.7.9, macOS Sonoma 14.8.9, macOS Tahoe 26.6.1, macOS Tahoe 26.7. An attacker on the network may be able to authenticate to Screen Sharing without valid credentials.

It was discovered that a nft object or expression could reference a nft set on a different nft table, leading to a use-after-free once that table was deleted.

A type confusion issue was addressed with improved state handling. This issue is fixed in macOS Big Sur 11.0.1, watchOS 7.1, iOS 12.4.9, watchOS 6.2.9, Security Update 2020-006 High Sierra, Security Update 2020-006 Mojave, iOS 14.2 and iPadOS 14.2, watchOS 5.3.9, macOS Catalina 10.15.7 Supplemental Update, macOS Catalina 10.15.7 Update. A malicious application may be able to execute arbitrary code with kernel privileges.

We have investigated reports of a spoofing vulnerability in AppX installer that affects Microsoft Windows. Microsoft is aware of attacks that attempt to exploit this vulnerability by using specially crafted packages that include the malware family known as Emotet/Trickbot/Bazaloader. An attacker could craft a malicious attachment to be used in phishing campaigns. The attacker would then have to convince the user to open the specially crafted attachment. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights. Please see the Security Updates table for the link to the updated app. Alternatively you can download and install the Installer using the links provided in the FAQ section. Please see the Mitigations and Workaround sections for important information about steps you can take to protect your system from this vulnerability. December 27 2023 Update: In recent months, Microsoft Threat Intelligence has seen an increase in activity from threat actors leveraging social engineering and phishing techniques to target Windows OS users and utilizing the ms-appinstaller URI scheme. To address this increase in activity, we have updated the App Installer to disable the ms-appinstaller protocol by default and recommend other potential mitigations.

Windows Kernel Elevation of Privilege Vulnerability

The issue was addressed with improved checks. This issue is fixed in Safari 18.1.1, iOS 17.7.2 and iPadOS 17.7.2, iOS 18.1.1 and iPadOS 18.1.1, macOS Sequoia 15.1.1, visionOS 2.1.1. Processing maliciously crafted web content may lead to arbitrary code execution. Apple is aware of a report that this issue may have been actively exploited on Intel-based Mac systems.

Memory overflow vulnerability leading to unintended control flow and Denial of Service in NetScaler ADC and NetScaler Gateway when configured as Gateway (VPN virtual server, ICA Proxy, CVPN, RDP Proxy) OR AAA virtual server