Dlink: community verdicts
32 notable / known-exploited Dlink CVEs the community has triaged.
Exploitation first, with newly exploited CVEs rising above old ones
- CVE-2025-29635HIGH 7.2KEVEPSS 88%
A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution.
- CVE-2024-3272CRIT 9.8KEVEPSS 98%
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as very critical, has been found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. This issue affects some unknown processing of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument user with the input messagebus leads to hard-coded credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259283. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
- CVE-2023-25280CRIT 9.8KEVEPSS 98%
OS Command injection vulnerability in D-Link DIR820LA1_FW105B03 allows attackers to escalate privileges to root via a crafted payload with the ping_addr parameter to ping.ccp.
- CVE-2020-25078HIGH 7.5KEVEPSS 98%
An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. The unauthenticated /config/getuser endpoint allows for remote administrator password disclosure.
- CVE-2014-8361CRIT 9.8KEVEPSS 100%
The miniigd SOAP service in Realtek SDK allows remote attackers to execute arbitrary code via a crafted NewInternalClient request, as exploited in the wild through 2023.
- CVE-2020-25506CRIT 9.8KEVEPSS 100%
D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the system_mgr.cgi component, which can lead to remote arbitrary code execution.
- CVE-2019-16920CRIT 9.8KEVEPSS 100%
Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.
- CVE-2021-45382CRIT 9.8KEVEPSS 98%
A Remote Command Execution (RCE) vulnerability exists in all series H/W revisions D-link DIR-810L, DIR-820L/LW, DIR-826L, DIR-830L, and DIR-836L routers via the DDNS function in ncc2 binary file. Note: DIR-810L, DIR-820L, DIR-830L, DIR-826L, DIR-836L, all hardware revisions, have reached their End of Life ("EOL") /End of Service Life ("EOS") Life-Cycle and as such this issue will not be patched.
- CVE-2018-6530CRIT 9.8KEVEPSS 97%
OS command injection vulnerability in soap.cgi (soapcgi_main in cgibin) in D-Link DIR-880L DIR-880L_REVA_FIRMWARE_PATCH_1.08B04 and previous versions, DIR-868L DIR868LA1_FW112b04 and previous versions, DIR-65L DIR-865L_REVA_FIRMWARE_PATCH_1.08.B01 and previous versions, and DIR-860L DIR860LA1_FW110b04 and previous versions allows remote attackers to execute arbitrary OS commands via the service parameter.
- CVE-2024-3273HIGH 7.3KEVEPSS 100%
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nas_sharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
- CVE-2015-2051HIGH 8.8KEVEPSS 97%
The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.
- CVE-2022-26258CRIT 9.8KEVEPSS 92%
D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.
- CVE-2019-17621CRIT 9.8KEVEPSS 90%
The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network.
- CVE-2019-20500HIGH 7.8KEVEPSS 97%
D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=config_save configBackup or downloadServerip parameter.
- CVE-2019-16057CRIT 9.8KEVEPSS 86%
The login_mgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.
- CVE-2015-1187CRIT 9.8KEVEPSS 83%
The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the ping_addr parameter to ping.ccp.
- CVE-2022-37055CRIT 9.8KEVEPSS 56%
D-Link Go-RT-AC750 GORTAC750_revA_v101b03 and GO-RT-AC750_revB_FWv200b02 are vulnerable to Buffer Overflow via cgibin, hnap_main,
- CVE-2021-40655HIGH 7.5KEVEPSS 87%
An informtion disclosure issue exists in D-LINK-DIR-605 B2 Firmware Version : 2.01MT. An attacker can obtain a user name and password by forging a post request to the / getcfg.php page
- CVE-2024-0769MED 5.3KEVEPSS 83%
** UNSUPPORTED WHEN ASSIGNED ** A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.
- CVE-2016-20017CRIT 9.8KEVEPSS 64%
D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.
- CVE-2020-25079HIGH 8.8KEVEPSS 54%
An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddns_enc.cgi allows authenticated command injection.
- CVE-2016-11021HIGH 7.2KEVEPSS 69%
setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.
- CVE-2020-29557CRIT 9.8KEVEPSS 54%
An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.
- CVE-2022-40799HIGH 8.8KEVEPSS 34%
Data Integrity Failure in 'Backup Config' in D-Link DNR-322L <= 2.60B15 allows an authenticated attacker to execute OS level commands on the device.
- CVE-2014-100005HIGH 8KEVEPSS 43%
Multiple cross-site request forgery (CSRF) vulnerabilities in D-Link DIR-600 router (rev. Bx) with firmware before 2.17b02 allow remote attackers to hijack the authentication of administrators for requests that (1) create an administrator account or (2) enable remote management via a crafted configuration module to hedwig.cgi, (3) activate new configuration settings via a SETCFG,SAVE,ACTIVATE action to pigwidgeon.cgi, or (4) send a ping via a ping action to diagnostic.php.
- CVE-2013-5223MED 5.4KEVEPSS 51%
Multiple cross-site scripting (XSS) vulnerabilities in D-Link DSL-2760U Gateway (Rev. E1) allow remote authenticated users to inject arbitrary web script or HTML via the (1) ntpServer1 parameter to sntpcfg.cgi, username parameter to (2) ddnsmngr.cmd or (3) todmngr.tod, (4) TodUrlAdd parameter to urlfilter.cmd, (5) appName parameter to scprttrg.cmd, (6) fltName in an add action or (7) rmLst parameter in a remove action to scoutflt.cmd, (8) groupName parameter to portmapcfg.cmd, (9) snmpRoCommunity parameter to snmpconfig.cgi, (10) fltName parameter to scinflt.cmd, (11) PolicyName in an add action or (12) rmLst parameter in a remove action to prmngr.cmd, (13) ippName parameter to ippcfg.cmd, (14) smbNetBiosName or (15) smbDirName parameter to samba.cgi, or (16) wlSsid parameter to wlcfg.wl.
- CVE-2020-9377HIGH 8.8KEVEPSS 21%
D-Link DIR-610 devices allow Remote Command Execution via the cmd parameter to command.php. NOTE: This vulnerability only affects products that are no longer supported by the maintainer
- CVE-2011-4723MED 5.7KEVEPSS 3%
The D-Link DIR-300 router stores cleartext passwords, which allows context-dependent attackers to obtain sensitive information via unspecified vectors.
- CVE-2021-42627CRIT 9.8Likely realEPSS 63%
The WAN configuration page "wan.htm" on D-Link DIR-615 devices with firmware 20.06 can be accessed directly without authentication which can lead to disclose the information about WAN settings and also leverage attacker to modify the data fields of page.
- CVE-2023-33782HIGH 8.8EPSS 37%
D-Link DIR-842V2 v1.0.3 was discovered to contain a command injection vulnerability via the iperf3 diagnostics function.
- CVE-2023-33781HIGH 8.8EPSS 32%
An issue in D-Link DIR-842V2 v1.0.3 allows attackers to execute arbitrary commands via importing a crafted file.
- CVE-2025-14884HIGH 7.2EPSS 11%
A vulnerability was detected in D-Link DIR-605 202WWB03. Affected by this issue is some unknown functionality of the component Firmware Update Service. Performing manipulation results in command injection. The attack can be initiated remotely. The exploit is now public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.